How to Reset Printer Canon Pixma iX6850 (Waste Ink Tank/Pad is Full)
Cara Reset Printer Canon Pixma iX6850 (Waste Ink Tank/Pad is Full)
Permasalahannya
- Waste ink tank full,
- Waste ink pad full,
- The ink absorber is almost full,
- Error 5B00,
- Error P07,
- Blink 7 times,
- Blink 8 times,
- The ink absorber becomes almost full,
- Error E08,
- Error E07,
- Error 6C10,
- Error 5B02
To reset the Canon Pixma iX6850 printer, follow the steps below:
Step 1: Enter Service Mode
- Turn off the printer.
- Press and hold the Resume button.
- Press and hold the Power button.
- Release the Resume button (while still holding the Power button).
- Press and release the Resume button four times.
- Press and hold the Resume button.
- Release both the Power and Resume buttons simultaneously.
"After both buttons are released, the power indicator will blink green for a while and then the green light will stay on continuously.If after following steps 1-7 the green light does not remain continuously but the printer continues to display an error, you have made a mistake in steps 1-7. Turn off the printer and repeat step 1."
Langkah 2: Reset Printer Pixma iX6850 dengan Aplikasi General Tool/Service Tool
- Reset Printer with Canon Service Tool v.3400 ==> Reset Here..
- Reset Printer with Canon Service Tool v.3900 ==> Reset Here..
- Reset Printer with Canon Service Tool v.4720 ==> Reset Here..
- Reset Printer with Canon Service Tool v.4905 ==> Reset Here..
Demikian artikel tentang Cara Reset Printer Canon Pixma iX6850 (The ink absorber is almost full, Waste ink tank full) semoga bermanfaat untuk kita semua
Post a Comment