How Reset Canon Pixma MG2200 (Waste Ink Tank/Pad is Full)
Reset Printer Canon Pixma MG2200 (Waste Ink Tank/Pad is Full)
Permasalahannya
- Waste ink tank full,
- Waste ink pad full,
- The ink absorber is almost full,
- Error 5B00,
- Error P07,
- Blink 7 times,
- Blink 8 times,
- The ink absorber becomes almost full,/
- Error E08,
- Error E07,
- Error 6C10,
- Error 5B02
Step 1: Enter Service Mode
- Turn off the printer.
- Press and hold the Stop/Reset button.
- Press and hold the Power/On button.
- Release the Stop/Reset button (while still holding the Power/On button).
- Press and release the Stop/Reset button 4 times.
- Press and hold the Stop/Reset button.
- Release both the Power/On and Stop/Reset buttons together.
Note: Once both buttons are released, the Power/On indicator will blink green for a moment and then turn green and stay lit.If after following the steps above, the green light does not remain lit and the printer continues to show an error, it means you have made a mistake in the steps. In this case, turn off the printer and repeat step 1.
Langkah 2: Reset Printer Canon Pixma MG2200 dengan manual/aplikasi General tool/service tool
Reset Printer Canon Pixma MG2200 with Resetter Tool
- Reset Printer Canon Pixma MG2200 with Resetter Canon ST v4905 ==> Reset here
Demikian artikel tentang Reset Printer Canon Pixma MG2200 (Waste ink absorber is almost full, Waste ink tank full) semoga bermanfaat untuk kita semua, Jika ada keluhan lain silahkan coret di kolom komentar
Post a Comment