The Mitsubishi CP-D90DW is a compact, high-speed dye-sublimation printer designed for professional photographers and event photographers. It uses dye-sublimation printing technology, which produces high-quality, long-lasting prints with rich, vibrant colors and sharp details.
The CP-D90DW is capable of printing at a resolution of 300dpi, and it can produce prints in a variety of sizes, including 4x6, 5x7, and 6x8 inches. It has a fast printing speed, with a 4x6 inch print taking just 7.8 seconds to produce.
One of the key features of the CP-D90DW is its compact size and lightweight design, which makes it easy to transport and set up at events. It also has a simple and user-friendly interface, with an easy-to-read LCD screen that allows users to adjust settings and preview images before printing.
Overall, the Mitsubishi CP-D90DW is a reliable and versatile printer that is well-suited for professional photographers who need a fast, high-quality printing solution for events, weddings, and other special occasions.
How to Reset Mitsubishi CP-D90DW Dye-Sublimation Printer (Causes and Solutions)
There are a few different reasons why you might need to reset your Mitsubishi CP-D90DW dye-sublimation printer. Some of the most common causes include:
- The printer is not responding or is stuck in an error state
- The printer is producing poor quality prints or is not printing at all
- The printer is displaying a service error or maintenance message
Here are some steps you can take to reset your Mitsubishi CP-D90DW printer:
- Power off the printer: The first step is to turn off the printer and unplug it from the power source.
- Check for paper jams: If your printer is not printing or is displaying an error message, check for any paper jams or other obstructions that may be causing the issue. Clear any jams and remove any obstructions before proceeding.
- Reset the printer: Once the printer is unplugged, press and hold the Power button for at least 5 seconds to reset the printer.
- Reconnect the power: Plug the printer back in and turn it on. Check to see if the issue has been resolved.
- If the issue persists, there are a few additional steps you can take to troubleshoot your Mitsubishi CP-D90DW printer:
- Check the ink ribbon: Make sure the ink ribbon is properly installed and not damaged. Replace the ribbon if necessary.
- Clean the printer: Use a soft, dry cloth to clean the printer's exterior and interior components, including the print head and rollers.
- Update the firmware: Check for any available firmware updates and install them if necessary.
- Contact support: If the issue still persists, contact Mitsubishi technical support for further assistance.
Overall, resetting your Mitsubishi CP-D90DW printer can help resolve a variety of issues, but it's important to identify the underlying cause of the problem and address it appropriately.
How to Reset Mitsubishi CP-D90DW Dye-Sublimation Printer
To reset the Mitsubishi CP-D90DW dye-sublimation printer, you can follow these steps:
- Turn off the printer: Make sure the printer is turned off and unplugged from the power source.
- Press and hold the "Feed" and "Cancel" buttons: While holding down these two buttons, plug the printer back in and turn it on.
- Wait for the printer to initialize: After a few seconds, the printer will start to initialize. Keep holding down the "Feed" and "Cancel" buttons until the printer beeps twice.
- Release the buttons: Once you hear the two beeps, release the "Feed" and "Cancel" buttons.
- Wait for the printer to finish resetting: The printer will now go through a reset process. Wait for it to finish before attempting to use it again.
How to Reset Mitsubishi CP-D90DW Dye-Sublimation Printer using Resetter Tools Application
To reset the Mitsubishi CP-D90DW dye-sublimation printer using the Resetter Tools application, you can follow these steps:
- Download and install the Resetter Tools application: You can download the Resetter Tools application from the Mitsubishi Electric website or from a third-party website.
- Connect the printer to your computer: Use a USB cable to connect the printer to your computer.
- Open the Resetter Tools application: Open the Resetter Tools application on your computer.
- Select the printer model: From the list of printer models in the Resetter Tools application, select the Mitsubishi CP-D90DW.
- Enter the printer's serial number: Enter the printer's serial number into the Resetter Tools application.
- Click the "Reset" button: Click the "Reset" button in the Resetter Tools application to start the reset process.
- Wait for the reset process to complete: The reset process may take a few minutes to complete. Wait for it to finish before disconnecting the printer from your computer.
After the reset process is complete, the printer should be back to its default settings and should be ready to use. If you continue to experience issues with the printer, you may need to contact Mitsubishi technical support for further assistance.
Post a Comment