How to solve error B204 on Canon Maxify printers
"Solving Error B204 on Canon Maxify Printers"
- The error B204 on Canon Maxify printers can occur after a cartridge replacement. To avoid this error, it is important to properly install the cartridges. Avoid piercing any plastic membranes during the installation process. The error may also appear if a completely empty cartridge is changed. In this case, the printer will go through a cleaning cycle after the full cartridge is installed, but the printhead has not received ink yet.
Here are two solutions to resolve this error:
Solution 1:
- Remove the cartridges
- Turn off the printer and unplug it for two minutes
- Turn the printer back on and re-install the cartridges
Solution 2:
- Turn on the printer
- Unplug the power cord
- Open the cover and manually move the printhead carriage to the cartridge replacement position (If the printhead carriage is not movable, reconnect the power cord and turn on the printer, then unplug it again when the carriage is in the moving position)
- Replace the cartridges
- Close the front cover, plug in the power cord, and turn on the printer for normal use.
Post a Comment